| Command |
$AA0N |
| Descrpition |
Perform 0mA/-10V calibration for specificed output channel |
| Syntax |
$AA0N[CHK](cr)
| $ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| 0 |
command for performing calibration
Type = 30, perform 0mA calibration
Type = 32, perform -10V calibration. |
| N |
specificed channel for calibration (0 to 3) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Exapmle |
| Command |
$0101 |
| Response |
!01 |
| Description |
Perform 0mA(or -10V) calibation of channel 1 of address 01, response success. |
|
| Reference |
$AA1N
|
|