v2.1.0.0 (2012-06-18)

* The pinmap filter: added ability to set pins to ON/OFF.
* The pinmap filter: added --data option to control data stream by pin state.
* Added --reconnect option to com2tcp-rfc2217.bat.
* Implemented serial port share mode to allow use COM port by other
  applications when port is not used by hub4com.
* Added --share-com-port option to com2tcp-rfc2217.bat.
* The telnet filter: added --ascii-cr-padding option to insert padding
  following CR in the default ASCII mode.
* The pin2con filter: added --delay-disconnect option to ignore the disconnect
  if the connect will raised shortly.
* Added --delay-disconnect option to com2tcp-rfc2217.bat.
* Implemented tag-sync filter to allow resynchronization data tagged by tag
  filter after data lost.
* Added ability to divide incoming TCP sessions (prevent accepting new TCP
  connection until the connection counter is 0).
* Fixed some bugs and made some improvements.

v2.0.1.0 (2011-05-10)

* Implemented priority and reject modifiers for TCP/IP listener.
* Added ability disable writing to the TCP/IP or serial ports.
* Fixed some TCP/IP bugs.
* Added connection counter logic to pinmap filter.
* Made some optimizations and improvements.

v2.0.0.0 (2009-03-12)

* Added TCP/IP ports support.
* Implemented all com2tcp functionality.
* Implemented RFC 2217 "Telnet Com Port Control Option" protocol.
* New features can be added by implementing plugins.
* Many other features added.

v1.1.0.0 (2008-03-17)

* Added read interval timeout option.
* Added ability to send data received from port to the same port.
* Fixed some bugs.

2007-02-26 - hub4com v1.0.0.0 released.
2007-01-23 - hub4com project moved to http://com0com.sourceforge.net/.
2006       - hub4com project started.
