I-87064 Specification

Relay Output	Output Channel	8
	Contact Type	Form A : normal open (N.O.) contact
	Contact Rating	5A@250VAC or 5A@30VDC
	Operate/Release Time	6mS/3mS max.
	Life	Mechanical : 2*107 min. Electrical : 105 min. (Contact Rating)
	Dielectric Strength	between open contacts : 750VAC between coil and contacts : 2000VAC
	Surge Strength	4000V
LED Display	1 LED as Power/Communication indicator 8 LEDs as relay output indicators
Power Consumption	Maximum : 1.7W

I-87064 Pin Assignment

Terminal Number Pin Name 1 NO0 2 COM0 3 NO1 4 COM1 5 - 6 NO2 7 COM2 8 NO3 9 COM3 10 - 11 NO4 12 COM4 13 NO5 14 COM5 15 - 16 NO6 17 COM6 18 NO7 19 COM7 20 -

I-87064 Block Diagram

I-87064 Wire Connection

Output Type	ON State LED ON Readback as 1	OFF State LED OFF Readback as 0
Relay Contact

I-87064 Dimention

I-87064 Default Setting

Configuration	Default Setting	Description
Type	40	Digital Input/Output
Baudrate	0A	115200 bps
Format	00	CheckSum disable

I-87064 Command Sets

Command	Description
%AANNTTCCFF	Set Module Configuration
$AA2	Read module configuration
$AA4	Read synchronized digital input/output status
$AA5	Read reset status
$AA6	Read digital input/output status
$AAF	Read firmware version
$AAM	Read module name
#**	Synchronized sampling
#AABBDD	Digital output
@AA	Read digital input/output status
@AA(Data)	Set digital outputs
~AA0	Read module status
~AA1	Reset module status
~AA2	Read host watchdog timeout setting
~AA3ETT	Set host watchdog timeout setting
~AA4S	Read PowerOn Value / Safe Value
~AA5S	Set PowerOn Value / Safe Value
~AAO(Name)	Set module name

Back to Previous Page