I-87057 Specification

Digital Output	Output Channel	16
	Output Type	Isolated open-collector
	Max load current	100mA per channel
	Load voltage	+5V to +30VDC
	Isolation Voltage	3750 Vrms
LED Display	1 LED as Power/Communication indicator 16 LEDs as digital output indicators
Power Consumption	Maximum : 1.0W

I-87057 Pin Assignment

Terminal Number Pin Name 1 DO0 2 DO1 3 DO2 4 DO3 5 DO4 6 DO5 7 DO6 8 DO7 9 DO8 10 DO9 11 DO10 12 DO11 13 DO12 14 DO13 15 DO14 16 DO15 17 DO.GND 18 DO.GND 19 DO.PWR 20 DO.PWR

I-87057 Block Diagram

I-87057 Wire Connection

Output Type	ON State LED ON Readback as 1	OFF State LED OFF Readback as 0
Drive Relay
Resistance Load

I-87057 Dimention

I-87057 Default Setting

Configuration	Default Setting	Description
Type	40	Digital Input/Output
Baudrate	0A	115200 bps
Format	00	CheckSum disable

I-87057 Command Sets

Command	Description
%AANNTTCCFF	Set Module Configuration
$AA2	Read module configuration
$AA4	Read synchronized digital input/output status
$AA5	Read reset status
$AA6	Read digital input/output status
$AAF	Read firmware version
$AAM	Read module name
#**	Synchronized sampling
#AABBDD	Digital output
@AA	Read digital input/output status
@AA(Data)	Set digital outputs
~AA0	Read module status
~AA1	Reset module status
~AA2	Read host watchdog timeout setting
~AA3ETT	Set host watchdog timeout setting
~AA4S	Read PowerOn Value / Safe Value
~AA5S	Set PowerOn Value / Safe Value
~AAO(Name)	Set module name

Back to Previous Page