I-87024 Specification

Analog Output	Output Channel	4 channels
	Output Type	V, mA
	Accuracy	±0.1% of FSR
	Resolution	±0.02% of FSR
	Zero Drift	Voltage : ±30µV/ºC Current : ±0.2µA/ºC
	Span Temperature Coefficient	±20ppm/ºC
	Programmable Output Slope	Voltage : 0.0625 to 1024V/Second Current :0.125 to 2048mA/Second
	Voltage Output Driver	5mA max (sink/source)
	Current Load Capability with 24V external power	1050 Ohms max
	Isolation Voltage	3000Vrms
LED Display	1 LED as Power/Communication indicator
Power Consumption	Maximum : 1.5W

I-87024 Pin Assignment

Terminal Number Pin Name 5 Iout0 6 AGND 7 Iout1 8 AGND 9 Iout2 10 AGND 11 Iout3 12 AGND 13 Vout0 14 AGND 15 Vout1 16 AGND 17 Vout2 18 AGND 19 Vout3 20 AGND

I-87024 Block Diagram

I-87024 Wire Connection

Voltage Output Wiring
Current Output Wiring
Screw wire into I-87024

I-87024 Dimention

I-87024 Default Setting

Configuration	Default Setting	Description
Type	32	Analog Output 0 to +10V
Baudrate	0A	115200 bps
Format	00	CheckSum disable Immediate Output Engineer Unit Format

I-87024 Command Sets

Command	Description
%AANNTTCCFF	Set Module Configuration
$AA0N	Perform 0mA/-10V calibration for specificed output channel
$AA1N	Perform 20mA/+10V calibration for specificed output channel
$AA2	Read configuration
$AA3NVV	Trim output of specificed channel
$AA4N	Set PowerOn Value of specificed output channel
$AA5	Read reset status
$AA6N	Readback last output command value of specificed output channel
$AA7N	Read PowerOn Value of specificed output channel
$AA8N	Readback current output value of specificed output channel
$AAF	Read firmware version
$AAM	Read module name
#AAN(Data)	Output analog value of specificed channel
~AA0	Read module status
~AA1	Reset module status
~AA2	Read host watchdog timeout setting
~AA3ETT	Set host watchdog timeout setting
~AA4N	Read Safe Value of specificed output channel
~AA5N	Set Safe Value of specificed output channel
~AAO(Name)	Set module name

Back to Previous Page