I-87065 Specification

AC-SSR Output	Output Channel	8
	AC-SSR Type	Normal Open
	Load Voltage Rating	24 to 265 V_RMS
	Off-state Leakage Current	1.5mA_RMS (a 200V_RMS 60Hz) max.
	Load Current	1.0A_RMS max.
	Operate Time	1mS max.
	Release Time	1/2 cycle + 1mS max.
	Dielectric Strength	2500V_RMS
LED Display	1 LED as Power/Communication indicator 8 LEDs as AC-SSR output indicators
Power Consumption	Maximum : 0.7W

I-87065 Pin Assignment

Terminal Number	Pin Name
1	SSR0+
2	SSR0-
3	SSR1+
4	SSR1-
5	-
6	SSR2+
7	SSR2-
8	SSR3+
9	SSR3-
10	-
11	SSR4+
12	SSR4-
13	SSR5+
14	SSR5-
15	-
16	SSR6+
17	SSR6-
18	SSR7+
19	SSR7-
20	-

I-87065 Block Diagram

I-87065 Wire Connection

Output Type

ON State
LED ON
Readback as 1

OFF State
LED OFF
Readback as 0

AC-SSR Output

I-87065 Dimention

I-87065 Default Setting

Configuration	Default Setting	Description
Type	40	Digital Input/Output
Baudrate	0A	115200 bps
Format	00	CheckSum disable

I-87065 Command Sets

Command	Description
%AANNTTCCFF	Set Module Configuration
$AA2	Read module configuration
$AA4	Read synchronized digital input/output status
$AA5	Read reset status
$AA6	Read digital input/output status
$AAF	Read firmware version
$AAM	Read module name
#**	Synchronized sampling
#AABBDD	Digital output
@AA	Read digital input/output status
@AA(Data)	Set digital outputs
~AA0	Read module status
~AA1	Reset module status
~AA2	Read host watchdog timeout setting
~AA3ETT	Set host watchdog timeout setting
~AA4S	Read PowerOn Value / Safe Value
~AA5S	Set PowerOn Value / Safe Value
~AAO(Name)	Set module name

Back to Previous Page